 |  |  | |  |
DDR Billet Intake Manifold for Sea-Doo Our Price: $2,985.00 | Fizzle Z142 Complete Supercharger (24+ PSI) Our Price: $2,095.00 | Fizzle Z142-S Complete Supercharger (23+ PSI) Our Price: $1,949.00 | ||
Introducing the DDR billet aluminum intake manifold for Sea-Doo 300 watercraft! This CNC machined long runner manifold is designed for a massive increase in acceleration and top speed gains on highly modified supercharged or turbo Sea-Doo. In our personal testing this manifold gained 3 MPH and shaved more than a half second off of our 0-85 MPH times!
| Why buy?
With the Fizzle Supercharger you can Hit Harder, Weigh Lighter, and Be Unique!
| Why buy?
With the Fizzle Supercharger you can Hit Harder, Weigh Lighter, and Be Unique!
| ||
| ||||
 | |  | |  |
Fizzle X4 Complete 137+4 Supercharger (16+ PSI) Our Price: $1,795.00 | Fizzle Z135 Complete Supercharger (18+ PSI) Our Price: $1,795.00 | OEM Sea-Doo 300 Complete Supercharger List Price: $1,599.99 Our Price: $1,599.99 Sale Price: $1,333.33 Savings: $266.66 | ||
Why buy? Go Faster (~3 MPH Speed Gain) Accelerate Harder Lightweight & Efficient Fast Guys Choose Fizzle! With the Fizzle Supercharger you can Hit Harder, Weigh Lighter, and Be Unique! Increase top speed, acceleration and throttle response with the Fizzle X4 Supercharger! More torque and more horsepower = more fun!! This lightweight, precision machined billet aluminum supercharger packs a big punch! Typical gains are ~3 PSI more boost pressure and ~300 more RPMs over the OEM supercharger wheel! The Fizzle X4 Supercharger will max out at more than 16 PSI. Get more Speed, more Acceleration, and more Thrill! Our patent pending supercharger impeller design features aggressive blade geometry combined with an integrated supercharger impeller nut and raised center section for the ultimate experience in acceleration, boost, and top speed gains! This supercharger comes fully assembled, including the required supercharger housing spacer. The clutch slip tension is pre-set to the recommended setting. All components are brand new, using the OEM genuine Sea-Doo BRP supercharger as a base to build this performance supercharger. | Why buy?
With the Fizzle Supercharger you can Hit Harder, Weigh Lighter, and Be Unique!
| Complete Sea-Doo 300 Supercharger Assembly - part number 420893588 (also replaces 420893567 and 420893566) and fits all 2016-2024 Sea-Doo 300 models. Bolt-in and go! This is a genuine Sea-Doo factory replacement part, supplied directly from BRP Sea-Doo. If you need a performance supercharger, check out the Fizzle Z135, Z142-S, Z142 supercharger assemblies. | ||
| ||||
 | |  | |  |
OEM Sea-Doo 230/255/260 Complete Supercharger List Price: $1,369.00 Our Price: $1,369.00 Sale Price: $1,250.00 Savings: $119.00 | Fizzle SuperCooler + Tubing Upgrade Kit + TiAL Blow Off Valve Our Price: $1,019.00 | Calas Performance Billet Racing Camshaft Our Price: $799.00 | ||
| Complete Sea-Doo 230/255/260 Supercharger Assembly - part number 420893551 (also replaces 420893555, 420893563, 420881992 and 420881990) and fits all 2008-2024 Sea-Doo 230/255/260 models. Bolt-in and go! This is a genuine Sea-Doo factory replacement part, supplied directly from BRP Sea-Doo. If you need a performance supercharger, check out the Fizzle X4 supercharger assembly. | Applications: All years Sea-Doo 300 and 2018+ 230 HP watercraft
CLICK TO LEARN MORE | Introducing the ultimate performance camshaft for Sea-Doo engines! Gain 350-450 RPM, 3-5 MPH, and arm stretching acceleration throughout the entire power band with the Calas Performance Billet Camshaft. This cam is precision CNC machined from high strength steel and heat treated for maximum durability and consistent results every time. Champion tested and champion proven! This camshaft is the same one used by multi-time HydroDrag World Champion Ernesto Calas in his personal racing PWC!
| ||
| ||||
 | |  | |  |
Fizzle SuperCooler with Intercooler Tubing Upgrade Kit Our Price: $750.00 | Sea-Doo 300 Front & Rear Housing for Fizzle Z142 Wheel Our Price: $699.00 | Fizzle F1000 Sea-Doo 215 Intercooler Kit Our Price: $699.00 | ||
Applications: All Years Sea-Doo 300 and 2018+ 230 HP watercraft
CLICK TO LEARN MORE | Applications: 2003-2009 215 & 185HP Sea-Doo RXP/RXT/GTX
| |||
| ||||
 | |  | |  |
DDR Carbon Fiber Sponsons For 2021+ Sea-Doo RXP Our Price: $650.00 | Fizzle Z142 Supercharger Impeller (24+ PSI) Our Price: $599.00 | Our Price: $599.00 | ||
| Why buy?
With the Fizzle Supercharger you can Hit Harder, Weigh Lighter, and Be Unique! Increase top speed, acceleration and throttle response with the Fizzle Z142 Supercharger Impeller! More torque and more horsepower = more fun!! This lightweight, precision machined billet aluminum supercharger packs a big punch! It will max out at more than 24 PSI of boost. Get more Speed, more Acceleration, and more Thrill! Our patent pending supercharger impeller design features aggressive blade geometry combined with an integrated supercharger impeller nut and raised center section for the ultimate experience in acceleration, boost, and top speed gains! This supercharger impeller comes with the required supercharger housing spacer. The front and rear housing must be machined to fit this impeller. | Unlock the performance of your Sea-Doo by turning its potential into a reality! This tuning license is tied to your VIN and gives you unlimited access to the Riva Tuning library for your Sea-Doo. Easily switch between performance tunes and then back to stock settings if you wish. There are a number of tune files for many different levels of performance modifications. The MaptunerX handheld tuning device used to load the tune into your ECU is sold separately. Bundle the MaptunerX with your tuning license for only $300 or rent our MaptunerX with a refundable $300 deposit. The MaptunerX tuning device can program more than 1 watercraft as long as a separate tuning license has been purchased for each additional watercraft. System Requirements: | ||
| ||||
 | |  | |  |
Our Price: $599.00 | Fizzle F1000 Sea-Doo 260 Intercooler Upgrade Our Price: $599.00 | Rebuild Kit for Sea Doo 300 HP Superchargers Our Price: $593.90 | ||
Applications: All years Sea-Doo 300 & 2018+ 230 HP watercraft
CLICK TO LEARN MORE | Applications: 2012-2015 Sea-Doo 260 HP (non-suspension) Retrofits to GTR 215, GTX 215 (S3 hull) using OEM 260 Mount
CLICK TO LEARN MORE | This full rebuild kit for 300 HP Sea-Doo Superchargers comes with everything pictured. All of the components are genuine Sea-Doo parts directly from BRP/Rotax. | ||
| ||||
 | |  | |  |
Fizzle Z142-S Supercharger Impeller (23+ PSI) Our Price: $549.00 | Fizzle F1000 Intercooler (Intercooler Only) Our Price: $519.00 | Sea-Doo 300 Front Housing for Fizzle Z142 Wheel Our Price: $499.00 | ||
Why buy?
With the Fizzle Supercharger you can Hit Harder, Weigh Lighter, and Be Unique! Increase top speed, acceleration and throttle response with the Fizzle Z142-S Supercharger Impeller! More torque and more horsepower = more fun!! This lightweight, precision machined billet aluminum supercharger packs a big punch! It will max out at more than 23 PSI of boost. This impeller fits the factory OEM Sea-Doo front housing. The rear housing must be machined to 143mm to fit this impeller. Get more Speed, more Acceleration, and more Thrill! Our patent pending supercharger impeller design features aggressive blade geometry combined with an integrated supercharger impeller nut and raised center section for the ultimate experience in acceleration, boost, and top speed gains! This supercharger impeller comes with the required supercharger housing spacer. |
| |||
| ||||
 | |  | |  |
Fizzle X4 137+4 Supercharger Impeller (16+ PSI) 230/255/260 Drop-in Wheel Our Price: $499.00 | Fizzle Z135 Supercharger Impeller (18+ PSI) Drop-in Wheel Our Price: $499.00 | Fizzle Sea-Doo 300 Intercooler Tubing Upgrade Kit with BOV Our Price: $499.00 | ||
Why buy?
Increase top speed, acceleration and throttle response with the Fizzle X4 Supercharger Impeller! More torque and more horsepower = more fun!! This lightweight, precision machined billet aluminum supercharger packs a big punch! Typical gains are ~3 PSI more boost pressure and ~300 more RPMs over the OEM supercharger wheel! The Fizzle X4 Supercharger Impeller will max out at more than 16 PSI. Get more Speed, more Acceleration, and more Thrill! Our patent pending supercharger impeller design features aggressive blade geometry combined with an integrated supercharger impeller nut and raised center section for the ultimate experience in acceleration, boost, and top speed gains! This supercharger comes with the required supercharger housing spacer. | Why buy?
With the Fizzle Supercharger you can Hit Harder, Weigh Lighter, and Be Unique!
| Applications: All years Sea-Doo 300 and 2018+ 230 HP watercraft
CLICK TO LEARN MORE | ||
| ||||
 | |  | |  |
Fizzle Gen. X Sea-Doo Intercooler (255/260) Our Price: $499.00 | Fizzle First Generation Sea-Doo 215 Intercooler Kit Our Price: $479.00 | Riva VT1100 Fuel Injectors (Sea-Doo) Our Price: $399.95 | ||
Applications: ALL 2008-2015 Sea-Doo 260 and 255 HP Models
| Applications: 2003-2009 215 & 185HP Sea-Doo RXP/RXT/GTX
| High performance 1100cc fuel injector kit supplies modified Sea-Doo engines with the necessary amount of fuel to produce reliable horsepower. Must be used with reflashed or aftermarket racing ECU for correct Calibration. | ||
| ||||
 | |  | |  |
Sea-Doo 300 Rear Housing for Fizzle Z142 Wheel/Z142-S Wheel Our Price: $399.00 | Calas Performance Springs & Retainers (Sea-Doo) Our Price: $389.00 | Our Price: $329.00 | ||
| Calas Performance Sea-Doo retainers are manufactured with high quality military certified Titanium alloy and are CNC machined for a tight fit. Calas Performance dual valve springs are computer designed to ensure that wire stress levels do not overpass the limits of stress defined in the diagrams of fatigue. We also utilize computer software control. | This unit allows you to remove the iBR actuator setup without experiencing check engine/fault mode as a result. This is useful in racing applications where you need to a run custom jet pump or nozzle setup or remove the heavy iBR actuator for weight savings. It is also useful for engine transplant applications where the Sea-Doo powerplant and electronics are transferred into a custom hull (mini boats etc.) and it's not feasible to mount and run the iBR setup on the new hull. (Please note the iBR controls Trim and Forward/Neutral/Reverse) *** Use at your own Risk *** | |||
| ||||
 | |  | |  |
Genuine 50mm TiAL Blow Off Valve Our Price: $268.00 | Fizzle Sea-Doo 325 Intercooler Tubing Upgrade Kit Our Price: $249.00 | Fizzle Sea-Doo 300 Intercooler Tubing Upgrade Kit for BOV Our Price: $249.00 | ||
Use this TiAL 50mm blow off valve to relieve excess pressure during off-throttle situations to reduce supercharger clutch and gear wear. Reduce heat soak by releasing unused air in the charge tube. The body and all internal components are CNC-machined from 6061 aluminum alloy. Securely mounts with a V-Band clamp design. Valve seal utilizes a Viton O-ring that is clamped in place for maximum durability. Valve stem and guide are Teflon-lubricated and hard anodize-coated for wear resistance. Blow-off Valve also comes with a machined aluminum banjo-type air fitting and bolt with oversized 10mm hose barb for quick actuator response. INCLUDES 8 PSI SPRING. Included with TiAL Blow-Off Valve:
| Applications: All years Sea-Doo 300 and 2018+ 230 HP watercraft
CLICK TO LEARN MORE | Applications: All years Sea-Doo 300 and 2018+ 230 HP watercraft
CLICK TO LEARN MORE | ||
| ||||
 | |  | |  |
Calas Performance Titanium Retainers (Sea-Doo) Our Price: $220.00 | Fizzle Sea-Doo 300 Intercooler Tubing Upgrade Kit Our Price: $199.00 | Riva Sea-Doo 1503/1630 Valve Spring Compression Tool Our Price: $161.95 | ||
| The Calas Performance Sea-Doo Titanium Retainer set includes twelve retainers that are precision machined with high quality military certified Titanium alloy. These retainers are extremely strong, lightweight and add improved wear resistance. The retainers are made to fit OEM factory valve spring set for all Sea-Doo 4-stroke models 2002-2023. | Applications: All years Sea-Doo 300 and 2018+ 230 HP watercraft
CLICK TO LEARN MORE | The RIVA overhead Valve Compression Tool allows easy removal of valve springs and keepers without removing cylinder head. Includes compression adapter to pressurize cylinder keeping valves in place during removal of stock springs and keepers. For use with all Sea-Doo 4-TEC 1503 and 1630 ACE engines. | ||
| ||||
 | |  | | |
JP Racing Catch Can for Sea-Doo Our Price: $159.00 | DDR Sea-Doo Intake Manifold Brace Girdle Our Price: $149.00 | Ribbon Delete Kit (IMUK) for Sea-Doo 325/300/230 Our Price: $139.00 | ||
The JP Racing oil catch can eliminates power-robbing blow by fumes and oil vapor from your engine's air intake tract. Also improves intercooler efficiency by preventing an oil sludge coating that saturates the inside of the intercooler. Excess oil vapor is routed to our stainless steel catch can where it collects for draining via petco*ck valve. The JP Racing catch cans are hand made in the USA! *Make sure your oil level isn't overfilled. This will cause Excess crank case pressure, this will fill the oil catch can and may spill oil over into the hull. Keep oil level just under the top bend of your oil stick. Check and drain during your service interval. We recommend 25 hours. Kit includes:
| This Intake manifold brace girdle provides heavy duty reinforcement to the intake manifold by giving it added strength that allows it to hold up to higher boost pressures and prevent the intake manifold from splitting at the seam. This part does not require any drilling or cutting of the intake manifold. This brace fits all supercharged Sea-Doo watercraft and we consider it a must-have item for any Sea-Doo 300 and a great precautionary measure for any modified Sea-Doo pushing more than 13 PSI of boost. | Let your engine breathe better! This kit allows you to easily remove the restrictive filter element from inside the intake manifold. Removing the restriction increases horsepower and allows for gains of ~1 PSI of boost pressure. Included is a cutting guide for the required 3-1/8” (79mm) hole saw that’s needed to remove the filter element (hole saw sold separately). The void left by the filter element is filled with the provided precision machined billet aluminum block-off plug with o-ring seals and also includes a 2-piece billet aluminum clamp to secure the block-off plug in place. The block-off plug also features a 1/8” NPT threaded port that allows you to connect a vacuum line to work with a wide array of accessories such as blow off valves, boost gauges, or rising rate fuel pressure regulators. All the aluminum components are anodized for increased corrosion protection. Fits all Sea-Doo 325, 300, and 230 HP watercraft | ||
| ||||
| |  | |  |
Fizzle 2 Degree Pump Wedge for Sea-Doo Our Price: $89.00 | DashPac Wideband O2 Oxygen Sensors Our Price: $85.00 | Our Price: $69.00 | ||
Increase speed and achieve a drier ride by raising the bow of your watercraft with this 2 degree pump wedge. The extra angle creates more lift in the hull and less drag, which typically increases top speed by around 1-2 MPH. This pump wedge is machined from billet aluminum and is anodized for increased corrosion protection. It has easy installation as the wedge fits directly between where the venturi nozzle bolts to the jet pump housing. Fits all Sea-Doo watercraft equipped with a 159mm jet pump | Replacement Wide Band sensor for DashPac | Applications: All Sea-Doo and Yamaha Intercooled Watercraft
| ||
| ||||
 | | | | |
Replacement Ceramic Bearing for Sea Doo 300 HP Superchargers Our Price: $59.00 | Fizzle Sea-Doo 300 Supercharger Shaft Holding Wrench Our Price: $39.95 | Fizzle Blow Off Valve Block-Off Kit for 50mm Flange Our Price: $29.95 | ||
| This is a replacement ceramic ball bearing for 300 HP Sea-Doo Superchargers. Each supercharger uses 2 bearings total. These components are genuine parts for Sea-Doo directly from BRP/Rotax. Sea-Doo superchargers operate in a high RPM environment that puts stress on the bearings over time. We recommend replacing the bearings on a regular service interval of a minimum of every 2 years or 100 hours, whichever comes first, to promote longevity and reduce the risk of bearing failure. | This supercharger shaft holding tool for Sea-Doo 300 HP watercraft allows you to lock the supercharger shaft in place in order to service the supercharger, change out the supercharger impeller wheel and check/set the clutch slip tension. Fits all Sea-Doo 300 watercraft from 2016 to present | This blow off valve block-off kit includes an aluminum block-off plate, o-ring, and v-band clamp. It’s used to cover and seal off the 50mm blow off valve flange in the event that you decide to not use a blow off valve on your setup. This block-off kit is compatible with the 50mm flange that is included with certain Fizzle products, such as the Fizzle Yamaha Intercooler Kits and select Fizzle blow off valve kits for Sea-Doo and Yamaha. | ||
| ||||
 | |  | | |
Heavy-Duty Supercharger Spring Washers for Sea-Doo 215/230/255/260 Our Price: $27.95 | Supercharger Shim for Sea-Doo 215/230/255/260 Our Price: $14.95 | |||
This is a set of 5 heavy duty spring washers for 2004-2023 215, 230, 255 & 260 HP Sea-Doo PWC & Jet Boat models. The washers are designed to achieve a higher supercharger slip tension than is possible with the OEM spring washer set, which is required when running an upgraded high boost supercharger wheel. | This is a set of two supercharger shims (0.2mm thick) to fit 2004-2023 215, 230, 255 & 260 HP Sea-Doo PWC & Jet Boat models. The shims are used to achieve a higher slip tension when fine tuning your supercharger clutch setting. | |||
| ||||
