Abstract
PURPOSE. To determine whether visual fields measured by standard automated perimetry (SAP) can be distorted by higherspatial-frequency image components and, in particular, whether test-retest variability of SAP fields can be explained by the combination of small scale fixational drift, small stimulus size, and coarse spatial sampling of the visual fields. METHODS. Standard SAP test patterns have points 6° apart. The amplitude spectra of the perimeter's 10-2 fields (model 511 Humphrey Field Analyser [HFA]; Carl Zeiss Meditec, Inc., North Ryde, NSW, Australia) were assessed to see whether their finer grained sampling revealed spatial frequencies that could cause distortions of standard fields because of undersampling. Model visual fields were then constructed whose spectra were similar to the 10-2 fields, and test-retest variability was examined for Goldmann sizes III to VI stimuli and Gaussian fixational drift with standard deviations of 0.075° to 0.3°. RESULTS. The 10-2 fields showed significant spatial frequency content up to 0.25 cyc/deg, three times the highest frequency that a 30-2 or 24-2 sample grid can resolve. As reported for SAP, test-retest variability increased with scotoma depth, and increasing the stimulus size from III to VI caused a reduction in test-retest variability, as did reduced fixation jitter. CONCLUSIONS. With fixation drift half the size of that exhibited by good fixators, many of the features of SAP test-retest variability were reproduced. Reducing test-retest variability may therefore involve using large test stimuli that are blurry in appearance and that overlap somewhat when placed on the perimetric test grid. Overlap across the meridians should perhaps be avoided.
Original language | English |
---|---|
Pages (from-to) | 1014-1022 |
Number of pages | 9 |
Journal | Investigative Ophthalmology and Visual Science |
Volume | 52 |
Issue number | 2 |
DOIs | |
Publication status | Published - Feb 2011 |
Fingerprint
Dive into the research topics of 'The influence of sampling errors on test-retest variability in Perimetry'. Together they form a unique fingerprint.
View full fingerprint
Cite this
- APA
- Author
- BIBTEX
- Harvard
- Standard
- RIS
- Vancouver
Maddess, T. (2011). The influence of sampling errors on test-retest variability in Perimetry. Investigative Ophthalmology and Visual Science, 52(2), 1014-1022. https://doi.org/10.1167/iovs.10-6014
Maddess, Ted. / The influence of sampling errors on test-retest variability in Perimetry. In: Investigative Ophthalmology and Visual Science. 2011 ; Vol. 52, No. 2. pp. 1014-1022.
@article{4317e8c87a0f41eeac4ef18eb164cd1f,
title = "The influence of sampling errors on test-retest variability in Perimetry",
abstract = "PURPOSE. To determine whether visual fields measured by standard automated perimetry (SAP) can be distorted by higherspatial-frequency image components and, in particular, whether test-retest variability of SAP fields can be explained by the combination of small scale fixational drift, small stimulus size, and coarse spatial sampling of the visual fields. METHODS. Standard SAP test patterns have points 6° apart. The amplitude spectra of the perimeter's 10-2 fields (model 511 Humphrey Field Analyser [HFA]; Carl Zeiss Meditec, Inc., North Ryde, NSW, Australia) were assessed to see whether their finer grained sampling revealed spatial frequencies that could cause distortions of standard fields because of undersampling. Model visual fields were then constructed whose spectra were similar to the 10-2 fields, and test-retest variability was examined for Goldmann sizes III to VI stimuli and Gaussian fixational drift with standard deviations of 0.075° to 0.3°. RESULTS. The 10-2 fields showed significant spatial frequency content up to 0.25 cyc/deg, three times the highest frequency that a 30-2 or 24-2 sample grid can resolve. As reported for SAP, test-retest variability increased with scotoma depth, and increasing the stimulus size from III to VI caused a reduction in test-retest variability, as did reduced fixation jitter. CONCLUSIONS. With fixation drift half the size of that exhibited by good fixators, many of the features of SAP test-retest variability were reproduced. Reducing test-retest variability may therefore involve using large test stimuli that are blurry in appearance and that overlap somewhat when placed on the perimetric test grid. Overlap across the meridians should perhaps be avoided.",
author = "Ted Maddess",
year = "2011",
month = feb,
doi = "10.1167/iovs.10-6014",
language = "English",
volume = "52",
pages = "1014--1022",
journal = "Investigative Ophthalmology and Visual Science",
issn = "0146-0404",
publisher = "Association for Research in Vision and Ophthalmology Inc.",
number = "2",
}
Maddess, T 2011, 'The influence of sampling errors on test-retest variability in Perimetry', Investigative Ophthalmology and Visual Science, vol. 52, no. 2, pp. 1014-1022. https://doi.org/10.1167/iovs.10-6014
The influence of sampling errors on test-retest variability in Perimetry. / Maddess, Ted.
In: Investigative Ophthalmology and Visual Science, Vol. 52, No. 2, 02.2011, p. 1014-1022.
Research output: Contribution to journal › Article › peer-review
TY - JOUR
T1 - The influence of sampling errors on test-retest variability in Perimetry
AU - Maddess, Ted
PY - 2011/2
Y1 - 2011/2
N2 - PURPOSE. To determine whether visual fields measured by standard automated perimetry (SAP) can be distorted by higherspatial-frequency image components and, in particular, whether test-retest variability of SAP fields can be explained by the combination of small scale fixational drift, small stimulus size, and coarse spatial sampling of the visual fields. METHODS. Standard SAP test patterns have points 6° apart. The amplitude spectra of the perimeter's 10-2 fields (model 511 Humphrey Field Analyser [HFA]; Carl Zeiss Meditec, Inc., North Ryde, NSW, Australia) were assessed to see whether their finer grained sampling revealed spatial frequencies that could cause distortions of standard fields because of undersampling. Model visual fields were then constructed whose spectra were similar to the 10-2 fields, and test-retest variability was examined for Goldmann sizes III to VI stimuli and Gaussian fixational drift with standard deviations of 0.075° to 0.3°. RESULTS. The 10-2 fields showed significant spatial frequency content up to 0.25 cyc/deg, three times the highest frequency that a 30-2 or 24-2 sample grid can resolve. As reported for SAP, test-retest variability increased with scotoma depth, and increasing the stimulus size from III to VI caused a reduction in test-retest variability, as did reduced fixation jitter. CONCLUSIONS. With fixation drift half the size of that exhibited by good fixators, many of the features of SAP test-retest variability were reproduced. Reducing test-retest variability may therefore involve using large test stimuli that are blurry in appearance and that overlap somewhat when placed on the perimetric test grid. Overlap across the meridians should perhaps be avoided.
AB - PURPOSE. To determine whether visual fields measured by standard automated perimetry (SAP) can be distorted by higherspatial-frequency image components and, in particular, whether test-retest variability of SAP fields can be explained by the combination of small scale fixational drift, small stimulus size, and coarse spatial sampling of the visual fields. METHODS. Standard SAP test patterns have points 6° apart. The amplitude spectra of the perimeter's 10-2 fields (model 511 Humphrey Field Analyser [HFA]; Carl Zeiss Meditec, Inc., North Ryde, NSW, Australia) were assessed to see whether their finer grained sampling revealed spatial frequencies that could cause distortions of standard fields because of undersampling. Model visual fields were then constructed whose spectra were similar to the 10-2 fields, and test-retest variability was examined for Goldmann sizes III to VI stimuli and Gaussian fixational drift with standard deviations of 0.075° to 0.3°. RESULTS. The 10-2 fields showed significant spatial frequency content up to 0.25 cyc/deg, three times the highest frequency that a 30-2 or 24-2 sample grid can resolve. As reported for SAP, test-retest variability increased with scotoma depth, and increasing the stimulus size from III to VI caused a reduction in test-retest variability, as did reduced fixation jitter. CONCLUSIONS. With fixation drift half the size of that exhibited by good fixators, many of the features of SAP test-retest variability were reproduced. Reducing test-retest variability may therefore involve using large test stimuli that are blurry in appearance and that overlap somewhat when placed on the perimetric test grid. Overlap across the meridians should perhaps be avoided.
UR - http://www.scopus.com/inward/record.url?scp=79953281246&partnerID=8YFLogxK
U2 - 10.1167/iovs.10-6014
DO - 10.1167/iovs.10-6014
M3 - Article
SN - 0146-0404
VL - 52
SP - 1014
EP - 1022
JO - Investigative Ophthalmology and Visual Science
JF - Investigative Ophthalmology and Visual Science
IS - 2
ER -
Maddess T. The influence of sampling errors on test-retest variability in Perimetry. Investigative Ophthalmology and Visual Science. 2011 Feb;52(2):1014-1022. doi: 10.1167/iovs.10-6014